- To Share:
- |
Model: 2 Phase Hybrid Nema 23 Non-Captive Linear Stepper Motor with External Lead Screw JK57HSC(1.8 degree)
NEMA23, Non-captive linear stepper motor actuators, High performance, Exceptional endurance, Low noise, Highly effective. Multiple options: different size of motors, different types of leadscrews, different types of nuts.
There are four types of linear stepper motors: external drive linear stepper motors (including T-type lead screw and ball screw), Captive linear stepper motors and Non-Captive linear stepper motor, and the connector, gearbox, encoder, brake orintegrated driver are optional.
Linear Stepper Motors: These stepper motors with linear motion are open-loop systems with a base and a slider. They provide high speeds and resolutions. The sliders are also called forcers which contain a permanent magnet, teeth, and motor windings.
Jkongmotor provides high-quality leadscrews and nuts, opening up new avenues for equipment designers who need high performance and superior durability. The Jkongmotor's actuators generate more force than similar actuators due to their special stator geometry and optimized magnet materials.
Our proven permanent magnet linear actuators are ideal for simple designs with lower performance requirements.
Jkongmotor Products range of 57mm (NEMA23) Hybrid stepper motors are ideal for applications where size and cost is an important factor. JKONGMOTOR's NEMA 23 stepepr motors can be supplied with a variety of housings, single or double shaft options, winding configurations and IP rating options, JKONGMOTOR can also provide other stepper motor or bldc motor customized, such as brake, encoder, gearbox or integrated step motor...
Due to simple magnetic properties and no mechanical conversion, a linear motor offers precise and fast linear force. Stepper motors, on the other hand, have quite complex functionality due to the involvement of mechanical conversion and, most importantly, the introduction of multiple steps in the process.
A stepper motor is a device used for precise motion control, while a linear actuator is a linear motion device used for simple linear motion applications. They differ in construction, feedback, and force and speed characteristics, among other factors.
Linear motors are commonly used for actuating high performance industrial automation equipment. Their advantage, unlike any other commonly used actuator, such as a ball screw, timing belt, or rack and pinion, is that they provide any combination of high precision, high velocity, high force and long travel.
Features:
Product Name: Nema 23 Linear Stepper Motor with Non-Captive External Lead Screw
Size: 57x57mm NEMA23 Non-captive Hybrid Linear Stepper Motors
Holding Torque: 0.55N.m ~ 3N.m
Leads No.: 4leads
Motor Length: 41mm / 51mm / 56mm / 76mm / 82mm / 100mm / 112mm
Product Type: 2 Phase Hybrid Stepping Motor
Customized Parts: Connector, Gearbox, Encoder, Brake, Integrated driver...
General Specifiction:
Item | Specifications |
Step Angle | 1.8° |
Temperature Rise | 80℃max |
Ambient Temperature | -20℃~+50℃ |
Insulation Resistance | 100 MΩ Min. ,500VDC |
Dielectric Strength | 500VAC for 1minute |
Shaft Radial Play | 0.02Max. (450g-load) |
Shaft Axial Play | 0.08Max. (450g-load) |
Max. radial force | 75N (20mm from the flange) |
Max. axial force | 15N |
Electrical Specification:
| Model No. | Step Angle | Motor Length | Current | Resistance | Inductance | Holding Torque | # of Leads | Rotor Interia | Mass |
| ( °) | (L)mm | A | Ω | mH | N.m | No. | g.cm2 | kg | |
| JK57HSC41-2804 | 1.8 | 41 | 2.8 | 0.7 | 1.4 | 0.55 | 4 | 150 | 0.47 |
| JK57HSC51-2804 | 1.8 | 51 | 2.8 | 0.83 | 2.2 | 1 | 4 | 230 | 0.59 |
| JK57HSC56-2804 | 1.8 | 56 | 2.8 | 0.9 | 3 | 1.2 | 4 | 280 | 0.68 |
| JK57HSC76-2804 | 1.8 | 76 | 2.8 | 1.1 | 3.6 | 1.89 | 4 | 440 | 1.1 |
| JK57HSC82-3004 | 1.8 | 82 | 3 | 1.2 | 4 | 2.1 | 4 | 600 | 1.1 |
| JK57HSC100-3004 | 1.8 | 100 | 3 | 0.75 | 3 | 2.8 | 4 | 700 | 1.3 |
| JK57HSC112-3004 | 1.8 | 112 | 3 | 1.6 | 7.5 | 3 | 4 | 800 | 1.4 |
Note: Above only for representative products, products of special request can be made according to the customer request.
Screw Road Specification:
| Screw Diameter | Screw Lead | Screw Pitch | Travel per step | Screw Diameter | Screw Lead | Screw Pitch | Travel per step |
| (mm) | (mm) | (mm) | (mm) | (mm) | (mm) | (mm) | (mm) |
| Tr8 | 0.5 | 0.5 | 0.0025 | TR9.525 | 0.635 | 0.635 | 0.003175 |
| 2 | 2 | 0.01 | 1.27 | 1.27 | 0.00635 | ||
| 4 | 2 | 0.02 | 1.5875 | 1.5875 | 0.0079375 | ||
| 8 | 2 | 0.04 | 2.54 | 2.54 | 0.0127 | ||
| 12 | 2 | 0.06 | 5.08 | 2.54 | 0.0254 | ||
| 20 | 2.5 | 0.1 | 6.35 | 3.175 | 0.03175 | ||
| Tr10 | 2 | 2 | 0.01 | 10.16 | 1.12 | 0.0508 | |
| 4 | 2 | 0.02 | 12.7 | 3.175 | 0.0635 | ||
| 10 | 2 | 0.05 | 25.4 | 3.175 | 0.127 | ||
| 12 | 3 | 0.06 | |||||
Note: Above only for representative products, products of special request can be made according to the customer request.
Feature summary：
Feature summary：Low Inertia, Quick Response; High Torque, High Efficiency; Low Vibration, Low Noise.
Minimum order quantity：10pcs
Material Science：stator, rotor, stainless steel shaft, copper wire, magnetic steel...
Applicatin Scope: 3D Printers, Monitor Equipment, Medical Machinery, Textile Machinery, Packaging Machinery, Lighting, ect.
Packing：The sample is packed in carton,the batch with plastic pallet
Delivery time：Standard product: 7-10days
Customized product: 25-30days
Transaction mode：EXW, FOB, FCA, CIF, FAS, CFR, CPT, CIP, DAF, DEQ, DDU, DDP...
Product Dimensions: (Unit=mm)
Different Types:
Feature summary：High torque; High stability; Easy to plug...
Customized Design:
If this motor do not match with your request. Please feel free to contact with us,We can make customized shaft / winding / mounting flange / cable / connector / Encoder / Brake / Gearbox and others. We will works side-by-side with you and your team to design a motor that will fit the precise needs of your application. All Engineering and Support is done in-house.
Customized Shaft Types:
Matched Drivers:
2 Phase Stepper Motor driver Model: JKDM542 / DM556 / JKD5056S
